fototeddyandClaude Sonnet 5
6d7b32d622
App: - New DeviceRole.solar with its own BLE session/protocol/state (SolarSession, VanAlignSolarProtocol, SolarState), mirroring the leveling sensor but deliberately not wired into the Live Activity. - BluetoothManager now keeps an in-memory history per metric (voltage, current, power) instead of a single primary-metric series; cleared on app restart by design, not persisted to disk. - DeviceDetailView shows a channel picker above the history chart when a device has more than one chartable metric. - AddDeviceView recognizes the solar service UUID during setup. - DemoData gets a simulated solar device so the integration can be checked in the simulator without hardware. Firmware: - Add esp32_ble_solar.yaml (Votronic solar charge controller over BLE) and simulated variants (esp32_ble_sim.yaml, esp32_ble_solar_sim.yaml) for testing without a vehicle. - esp32_ble.yaml: set flash_size/psram for the ESP32-S3 N16R8 module. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
302 lines
9.2 KiB
YAML
302 lines
9.2 KiB
YAML
# VanAlign Pro - Neigungsmessung über BLE
|
||
#
|
||
# Bewusst nah am bewährten Stand 1.0 gehalten. Gegenüber diesem geändert:
|
||
#
|
||
# * Die Kalibrierung funktioniert. Die Charakteristik ...3427 war zwar
|
||
# beschreibbar, hatte aber keine Aktion hinterlegt und tat nichts; der
|
||
# Kalibrier-Knopf war nur über den Webserver erreichbar, der
|
||
# auskommentiert ist. Kalibrieren war damit auf keinem Weg möglich.
|
||
# * Der ESP-NOW-Rest ist entfernt. Er schickte bei jedem einzelnen
|
||
# Messwert ein "hallo" an eine fest eingetragene MAC-Adresse.
|
||
#
|
||
# Bewusst NICHT geändert: Pitch und Roll bleiben reine Lesewerte mit
|
||
# hinterlegtem Ausdruck. Eine Fassung mit notify und aktiv gesetzten Werten
|
||
# liess das Gerät verstummen - sie ist in der Projektgeschichte unter
|
||
# "Neigungsmesser VanAlign einbinden" nachlesbar, aber nicht in Betrieb.
|
||
# Der Client fragt die Werte stattdessen im Takt ab.
|
||
|
||
esphome:
|
||
name: vanalign
|
||
friendly_name: "VanAlign Pro"
|
||
|
||
|
||
esp32:
|
||
board: esp32-s3-devkitc-1
|
||
flash_size: 16MB
|
||
framework:
|
||
type: esp-idf
|
||
|
||
# N16R8: 16 MB Flash + 8 MB PSRAM, beim S3 als Octal-PSRAM angebunden.
|
||
psram:
|
||
mode: octal
|
||
speed: 80MHz
|
||
|
||
|
||
logger:
|
||
level: WARN
|
||
|
||
espnow:
|
||
channel: 1
|
||
sensor:
|
||
- platform: mpu6050
|
||
#address: 0x69
|
||
gyro_x:
|
||
name: "MPU6050 Gyro X-Achse"
|
||
id: mpu_gyro_x
|
||
gyro_y:
|
||
name: "MPU6050 Gyro Y-Achse"
|
||
id: mpu_gyro_y
|
||
gyro_z:
|
||
name: "MPU6050 Gyro Z-Achse"
|
||
id: mpu_gyro_z
|
||
accel_x:
|
||
name: "MPU6050 Accel X"
|
||
id: accel_x
|
||
internal: true
|
||
accel_y:
|
||
name: "MPU6050 Accel Y"
|
||
id: accel_y
|
||
internal: true
|
||
accel_z:
|
||
name: "MPU6050 Accel Z"
|
||
id: accel_z
|
||
internal: true
|
||
update_interval: 0.1s
|
||
- platform: template
|
||
name: "Neigung Pitch"
|
||
id: pitch
|
||
icon: mdi:caravan
|
||
unit_of_measurement: "°"
|
||
accuracy_decimals: 1
|
||
update_interval: 0.1s
|
||
lambda: |-
|
||
if (isnan(id(accel_x).state) || isnan(id(accel_y).state) || isnan(id(accel_z).state)) {
|
||
return NAN;
|
||
}
|
||
float raw = atan2(id(accel_y).state, sqrt(pow(id(accel_x).state, 2) + pow(id(accel_z).state, 2))) * (180.0 / 3.14159265);
|
||
return raw - id(pitch_offset); // Offset wird hier subtrahiert
|
||
filters:
|
||
- sliding_window_moving_average:
|
||
window_size: 8
|
||
send_every: 1
|
||
- exponential_moving_average:
|
||
alpha: 0.2
|
||
|
||
- platform: template
|
||
name: "Neigung Roll"
|
||
id: roll
|
||
icon: mdi:axis-x-rotate-clockwise
|
||
unit_of_measurement: "°"
|
||
accuracy_decimals: 1
|
||
update_interval: 0.1s
|
||
lambda: |-
|
||
if (isnan(id(accel_x).state) || isnan(id(accel_z).state)) {
|
||
return NAN;
|
||
}
|
||
float raw = atan2(-id(accel_x).state, id(accel_z).state) * (180.0 / 3.14159265);
|
||
return raw - id(roll_offset); // Offset wird hier subtrahiert
|
||
filters:
|
||
- sliding_window_moving_average:
|
||
window_size: 8
|
||
send_every: 1
|
||
- exponential_moving_average:
|
||
alpha: 0.2
|
||
|
||
globals:
|
||
- id: pitch_offset
|
||
type: float
|
||
restore_value: yes
|
||
initial_value: '0.0'
|
||
- id: roll_offset
|
||
type: float
|
||
restore_value: yes
|
||
initial_value: '0.0'
|
||
# Die Einbaulage liegt im Gerät, nicht in den Apps: Sie beschreibt, wie der
|
||
# Sensor im Fahrzeug sitzt – eine Eigenschaft des Einbaus, nicht des Telefons.
|
||
# Damit sehen iPhone, Uhr und Android dasselbe, ohne sie je einzeln zu
|
||
# bestimmen. Angewandt wird sie weiterhin in den Apps; das Gerät verwahrt sie
|
||
# nur, sonst rechneten ältere Clients die Korrektur ein zweites Mal.
|
||
- id: orientation_version
|
||
type: uint8_t
|
||
restore_value: yes
|
||
initial_value: '0'
|
||
- id: orientation_source
|
||
type: uint8_t
|
||
restore_value: yes
|
||
initial_value: '0'
|
||
- id: orientation_invert_long
|
||
type: bool
|
||
restore_value: yes
|
||
initial_value: 'false'
|
||
- id: orientation_invert_lat
|
||
type: bool
|
||
restore_value: yes
|
||
initial_value: 'false'
|
||
- id: orientation_twist
|
||
type: float
|
||
restore_value: yes
|
||
initial_value: '0.0'
|
||
|
||
- id: enable_captive
|
||
type: bool
|
||
restore_value: yes
|
||
initial_value: 'false'
|
||
|
||
esp32_ble_server:
|
||
services:
|
||
- uuid: 2a24b789-7aab-4535-af3e-ee76a35cc42d
|
||
advertise: true
|
||
characteristics:
|
||
- id: pitch_ble
|
||
uuid: cad48e28-7fbe-41cf-bae9-d77a6c233424
|
||
description: "Pitch"
|
||
read: true
|
||
value: !lambda |-
|
||
std::vector<unsigned char> v(sizeof(float));
|
||
float val = id(pitch).state;
|
||
memcpy(v.data(), &val, sizeof(float));
|
||
return v;
|
||
- id: roll_ble
|
||
uuid: cad48e28-7fbe-41cf-bae9-d77a6c233425
|
||
description: "Roll"
|
||
read: true
|
||
value: !lambda |-
|
||
std::vector<unsigned char> v(sizeof(float));
|
||
float val = id(roll).state;
|
||
memcpy(v.data(), &val, sizeof(float));
|
||
return v;
|
||
# Die gespeicherten Nullpunkte, zwei Floats. Daran erkennen die Apps,
|
||
# ob überhaupt schon kalibriert wurde.
|
||
- id: offsets_ble
|
||
uuid: cad48e28-7fbe-41cf-bae9-d77a6c233426
|
||
description: "Kalibrier-Offsets"
|
||
read: true
|
||
value: !lambda |-
|
||
std::vector<unsigned char> v(2 * sizeof(float));
|
||
float p = id(pitch_offset);
|
||
float r = id(roll_offset);
|
||
memcpy(v.data(), &p, sizeof(float));
|
||
memcpy(v.data() + sizeof(float), &r, sizeof(float));
|
||
return v;
|
||
|
||
# Die Einbaulage, acht Byte:
|
||
#
|
||
# 0 Version, 1 = gültig gesetzt, 0 = nie geschrieben
|
||
# 1 Längsachse: 0 = Pitch des Sensors, 1 = Roll des Sensors
|
||
# 2 längs umgekehrt (0/1)
|
||
# 3 quer umgekehrt (0/1)
|
||
# 4..7 Verdrehung um die Hochachse, float32, Grad
|
||
- id: orientation_ble
|
||
uuid: cad48e28-7fbe-41cf-bae9-d77a6c233428
|
||
description: "Einbaulage"
|
||
read: true
|
||
write: true
|
||
value: !lambda |-
|
||
std::vector<unsigned char> v(8, 0);
|
||
v[0] = id(orientation_version);
|
||
v[1] = id(orientation_source);
|
||
v[2] = id(orientation_invert_long) ? 1 : 0;
|
||
v[3] = id(orientation_invert_lat) ? 1 : 0;
|
||
float t = id(orientation_twist);
|
||
memcpy(v.data() + 4, &t, sizeof(float));
|
||
return v;
|
||
on_write:
|
||
then:
|
||
- lambda: |-
|
||
if (x.size() < 8 || x[0] != 1) {
|
||
ESP_LOGW("vanalign", "Einbaulage verworfen: %d Byte, Version %d",
|
||
(int) x.size(), x.empty() ? -1 : (int) x[0]);
|
||
return;
|
||
}
|
||
float t;
|
||
memcpy(&t, x.data() + 4, sizeof(float));
|
||
if (!std::isfinite(t) || fabsf(t) > 180.0f) {
|
||
ESP_LOGW("vanalign", "Einbaulage verworfen: Verdrehung %.1f", t);
|
||
return;
|
||
}
|
||
id(orientation_version) = 1;
|
||
id(orientation_source) = x[1];
|
||
id(orientation_invert_long) = x[2] != 0;
|
||
id(orientation_invert_lat) = x[3] != 0;
|
||
id(orientation_twist) = t;
|
||
ESP_LOGI("vanalign", "Einbaulage gespeichert: Quelle=%d laengs=%d quer=%d verdreht=%.1f",
|
||
(int) x[1], (int) x[2], (int) x[3], t);
|
||
|
||
- id: calib_ble
|
||
uuid: cad48e28-7fbe-41cf-bae9-d77a6c233427
|
||
description: "Kalibriere Neigung"
|
||
write: true
|
||
on_write:
|
||
then:
|
||
- lambda: |-
|
||
bool reset = !x.empty() && (x[0] == 0x00 || x[0] == '0');
|
||
if (reset) {
|
||
id(reset_calibration).execute();
|
||
} else {
|
||
id(calibrate_level).execute();
|
||
}
|
||
|
||
i2c:
|
||
sda: GPIO8
|
||
scl: GPIO9
|
||
scan: true
|
||
|
||
#web_server:
|
||
# port: 80
|
||
|
||
|
||
#ota:
|
||
# platform: web_server
|
||
|
||
|
||
#wifi:
|
||
# ap:
|
||
# ssid: "VanAlign-Setup"
|
||
# password: "kalibrierung"
|
||
|
||
|
||
|
||
script:
|
||
# Die aktuelle Lage wird zur neuen Null. Knopf und Bluetooth laufen hier
|
||
# zusammen, damit sie nicht auseinanderdriften.
|
||
- id: calibrate_level
|
||
then:
|
||
- lambda: |-
|
||
if (isnan(id(accel_x).state) || isnan(id(accel_y).state) || isnan(id(accel_z).state)) {
|
||
ESP_LOGW("vanalign", "Kalibrierung abgebrochen: keine Sensorwerte");
|
||
return;
|
||
}
|
||
id(pitch_offset) = atan2(id(accel_y).state, sqrt(pow(id(accel_x).state, 2) + pow(id(accel_z).state, 2))) * (180.0 / 3.14159265);
|
||
id(roll_offset) = atan2(-id(accel_x).state, id(accel_z).state) * (180.0 / 3.14159265);
|
||
ESP_LOGI("vanalign", "Kalibriert: pitch_offset=%.2f roll_offset=%.2f", id(pitch_offset), id(roll_offset));
|
||
|
||
- id: reset_calibration
|
||
then:
|
||
- lambda: |-
|
||
id(pitch_offset) = 0.0f;
|
||
id(roll_offset) = 0.0f;
|
||
ESP_LOGI("vanalign", "Kalibrierung zurückgesetzt");
|
||
|
||
button:
|
||
- platform: template
|
||
name: "Kalibriere Neigung"
|
||
id: calib_button
|
||
on_press:
|
||
- script.execute: calibrate_level
|
||
|
||
- platform: template
|
||
name: "Kalibrierung zurücksetzen"
|
||
id: calib_reset_button
|
||
on_press:
|
||
- script.execute: reset_calibration
|
||
- platform: restart
|
||
name: "ESP Restart"
|
||
|
||
text_sensor:
|
||
- platform: template
|
||
name: "Firmware Version"
|
||
id: firmware_version
|
||
icon: mdi:tag
|
||
lambda: |-
|
||
return {"v1.0.2"};
|